Upgrade Version 3018 PRO CNC Router Kit with XYZ Axis Limit Function

After the machine is assembled, you can perform basic machine tests. The recommended start-up sequence is as follows:

1. Confirm the USB cable of the control board is plugged into your computer, then start the computer. Launch the software and verify no errors are displayed in the status window. Under normal circumstances, the control board will display "Idle" when connected to the software. If a red "Alarm" error appears, click the Reset button and then unlock to reach the Idle state.

2. Ensure the 24V power supply is connected to the control board, and the other end is connected to 110-220V. Press the on/off button on the control panel.

3. Click the Spindle button to turn on the spindle motor. Move the slider left and right to verify the motor speed changes.

4. Adjust the Feed value to the range of 200 to 500. Use the mouse to click the direction buttons on the left to confirm the X and Y axes are moving. Similarly, click the up and down buttons on the right to verify the Z-axis moves normally. If all these tests are successful, your engraving machine can work normally. Shut down the machine by reversing the start-up process.

The package includes the following parts: 1 × Power Supply 24V, 1 × GRBL1.1 Control Board + USB Wire, 1 × U Disk (2G) + English Manual, 10 × Engraving Bit Kit (3.175mm/20°/0.1mm), 4 × Clamp + 1 × Brush + 1 × Rolled Strips 1× Emergency Stop (80mm), 3 × Limit Switch, 1 × X-axis Limit Fixing Plate, 1 × Y-axis Limit Fixing Plate, 1 × Z-axis Limit Acrylic, 1 × Spindle Motor Wire + 1 × Stepper Motor Wire + Winding Tube, 2 × ER Wrench + 1 × Allen Wrench Set

The Upgrade 3018 PRO package includes the following mechanical parts: 1 × 15×180×300mm Working Desk, 2 × 20×40×290mm Aluminum Profiles, 2 × 20×20×360mm Aluminum Profiles, 4 × Guide Rails (2 pcs Z-axis-φ10×360mm; 2 pcs Y-axis-φ10×360mm), 2 × Lead Screws (X-axis-365mm, Y-axis-295mm), 4 × Bakelite Resin Plates, 3 × Stepper Motors (42×34mm), 1 × X-Z Axis Assembly + 775 Spindle Motor (100W), 4 × Sliders, 1 × Nut Seat, and various screws.

The updated 3018 PRO CNC Router Machine includes new functions, such as: - X/Y/Z-axis limit switch function, which automatically stops the machine when the axes exceed the engraving range, extending the machine's lifespan. - Improved emergency stop button, allowing users to immediately halt engraving in unexpected situations.

The machine supports engraving on materials like wood, acrylic, PCB, PVB, and soft metals. It uses the GRBL 1.1 control board, which connects via USB and operates on 12-24VDC power. The control software is compatible with Windows XP, 7, and 10 (32/64-bit). The machine's work area is 300x180x45mm, with a frame size of 420x350x270mm.

The updated control board features several improvements, including an emergency stop port, X/Y/Z-axis limit switch ports, a power switch button, enhanced spindle drive, an outer casing, and an improved USB interface. These changes enhance the safety and usability of the machine.

product information: